RGB Laser ODL
Barco ODL-821
RGB laser projection cube for 24/7 operation
Key benefits
- 1.5x more brightness than typical 80" LED-lit cubes
- Light-source lifetime above 125,000 hours
- 25% lower power consumption at peak brightness
- Fully motorized, software-driven cube alignment
- DisplayPort 1.2 with 4K@60 Hz loop-through — one cable per 4 cubes
Overview
Barco ODL-821 is an 80" Full HD RGB laser rear-projection cube built for 24/7 operation in control rooms. Compared with typical 80" LED-lit rear-projection cubes it delivers 1.5x more brightness at 25% lower power consumption at higher brightness levels.
Light-source lifetime is at least 125,000 hours in both normal and eco mode. The fully motorized projection engine lets installers align the wall's cubes in software via Barco's Wall control manager, cutting installation time by up to 50% versus non-motorized engines. A single DisplayPort 1.2 cable with 4K@60 Hz loop-through serves up to four cubes in a chain.
Specifications
| Диагональ | 80" |
|---|---|
| Разрешение | 1920 × 1080 (Full HD) |
| Срок службы источника света | свыше 125 000 (норм./эконом. режим) ч |
|---|---|
| Энергопотребление | на 25% ниже на пиковой яркости (vs. предыдущее поколение) |
| Яркость | в 1,5 раза выше типовых 80" LED-лит кубов |
| Выравнивание | Полностью моторизованное, программное (Wall control manager) |
|---|
| Видеовход | DisplayPort 1.2, loop-through 4K@60Гц (до 4 кубов на кабель) |
|---|
Data source: Official Barco page
Documents and resources
Request a quote
Describe your project and an Infra Technologies engineer will get back to you with a suitable Barco solution.
Barco ODL-821